Allen Audio
Church audio image
SPECIFICATIONS
Allen Audio VPA rear view

VPA-100

COMMERCIAL
SPECIFICATION
INPUT:
8 analog inputs
6 mic/line inputs: 4 XLR (balanced/unbalanced) / 1/4” phone jack (balanced/unbalanced)
2 XLR (balanced/unbalanced) / RCA (unbalanced)
2 line inputs: 2 RCA (unbalanced)
48V phantom power, individually switched on XLR inputs
+58dB maximum gain for XLR mic inputs
+12dB maximum gain for line inputs
Input referred noise: -85dBV for line inputs (-88dBV, gate ON)
-123dBV for mic inputs (0 ohm, +58dBV gain)
Clipping point: +6dBV (+18dBV compressor ON)
Dynamic range: 91dB (106dB gate and compressor ON)
Total harmonic distortion: 0.05% line level, 0,07% mic +58dB
OUTPUT:
8 analog outputs, 1/4” phone jack (balanced/unbalanced)
Stereo headphones plug (shared with output 7 and 8)
Noise floor: -88dBV
DIGITAL:
20 bit ADCs and DACs
20-20Khz frequency response
4 band digital parametric EQ on each input channel
4-band digital parametric EQ on the first 4 output channels
Compressor and gate on each input channel
4 channel internal effects bus
Modular effect processing architecture
Code and parameters stored in Flash memory
14 total recall memories (“Presets”)
Front panel access to mixing levels and preset selection
RS-232 communication port for in-depth configuration and upgrades
Return to VPA 100 Page
150 Locust Street • Macungie, PA • 18062-0036 • Phone: 610-966-2202 • Fax: 610-965-3098